|
In 2007 and early 2008 CALSEIA worked with the California State Fire Marshal to develop an installation guideline to design and install PV systems so that fire crews have access on the roof to get to a roof ridge and space at the ridge to ventilate the building in the event this is necessary to perform a rescue. The draft guideline can be downloaded here. When the final guideline is available we will post it.
DRAFT PV_GUIDELINES_3-10-08
In 2006 CALSEIA and the Sacramento Municipal Utility District worked together to create a comprehensive training program for emergency responders who may have to address fire and safety situations on buildings equipped with solar electric systems.
Most of the components of this program are available for downloading here. There are four parts:
- Instructor Guide
- Presentation Material
- Student Material
- Addenda
Listed below are links to documents associated with each section. The documents that are not available should be available online by the end of March 2007.
Instructor Guide (7 documents)
LP 01 - Introduction
LP 02 - Cells _ Components
LP 03 - PV Performance
LP 04 - PV Applications
LP 05 - PV Codes
LP 06 - Emergency Response
Note to Instructors
Presentation Material (7 documents)
PV 01 Introduction
PV 02 Cells Components
PV 03 Performance
PV 04 Applications
PV 05 Codes _ Standards
PV 06 Emergency Response
PV Master
Student Material (2 documents)
pv handout
PV Student Manual - PART ONE
PV Student Manual - PART TWO
PV Student Manual - PART THREE
PV Student Manual - PART FOUR
Addenda (1 document)
bp solar advisory
|
Emergency Response 
